Regulatory Training

Please contact [e-mail] for all regulatory training needs.

As of the current version of this document, Hextronics has three classes of certification that an individual can obtain to oversee the deployment, operation, and maintenance of an Atlas 300 Drone Nest system. They are outlined as follows:

• Certified Operator

• Certified Technician

• Certified Instructor

Operations of scheduled or unscheduled drone flights/missions shall be conducted or overseen by a certified operator. Maintenance and preventative measures over the lifetime of the drone station shall be conducted by a certified technician. Note that a single individual can receive both certifications for both the operation and maintenance of the drone station. Official certification of other individuals can only be conducted by certified Instructors.

Certified Operator

• A certified operator is an individual who has obtained the relevant certifications for piloting a DJI Matric 300 Drone remotely in accordance to their local regulatory procedures, for example obtaining a FAA Part 107 Remote Pilot Certificate, as well as completed the Hextronics Operator training with a certified instructor.

• Training will be conducted with the drone station present with at least one party. Operator training will cover the following categories: Installation and setup of the Atlas300 Drone Station Basic Flight operations and mission planning with the DJI M300 and Atlas300 Operating Limitations and Emergency Procedures Pre-flight and post-flight inspections Basic hardware and maintenance

Certified Technician

• A certified Technician is an individual who has completed the Hextronics Techniciation training, conducted by a certified Instructor.

• Training will be conducted with the drone station present with at least one party. Operator training will cover the following categories: Installation and setup of the Atlas300 Drone Station Advanced Operational adjustments Procedures for routine / preventative maintenance inspections to be conducted in the field

Certified Instructor

• Instructor certification can only be obtained after three months, or 100 missions of use with the Atlas300 Drone station, and the individual must have completed the prior Hextronics operator and technician training of the Drone Station.

• A certified instructor will have a deep level of knowledge of the entire drone station, and can only be certified by another instructor.

• The certified instructor shall have training in all parts of the user manual, as well as an understanding of how to identify and solve any unforeseen issues with the drone station.