Maintenance Introduction
Last updated
Last updated
Hextronics Atlas300 and DJI Matrice 300 drone, as deployed as part of a larger fleet are subject to wear and tear from normal use. This maintenance/inspection manual is designed to extend and conserve the lifespan of the products in use. This maintenance/inspection manual does not promise or guarantee the products to be free from defects, damages, and errors.
This checklist is designed to suit the needs of routine maintenance check-ups and can be applied as frequently as necessary, but it is most efficient to perform maintenance on a per-flight basis, rather than a set time frame.
Proper operation, scheduling and maintenance of the drone & the station will result in increasing the lifespan longevity of both the station and the drone. Regularly perform the inspections to ensure all systems are in working order and that any repairs or replacements can be addressed before the next flight.
Check that you have the following equipment are on hand before maintaining the drone and the station: Anti-static cloth Small cleaning brush (for tight crevices) Compressed air canister (air duster) Anti-static wristband Electrical Contact Cleaner.
Always use protective equipment when handling, maintaining, inspecting or in contact with any Hextronics or DJI components. Drone stations and DJI drones are composed of various electrical and mechanical moving parts and may cause harm if not handled properly, confirm that all components and devices are disconnected from power and not in operation when handling, operating, maintaining, inspecting or servicing any Hextronics or DJI devices. Protective equipment may consist of but is not limited to closed to rubber shoes (for electrical grounding in order to prevent electric shock) Protective gloves also including electrical insulated gloves to avoid risk of injury to the hands including cuts, scraps, shocks, etc, also it is highly advised to to use eye protective equipment such as impact resistance goggles or impact resistance glasses in order to protect the users eyes from injury at anytime of operation, handling, maintaining, servicing, repair or inspection. Consult with the Hextronics support team or the DJI support team before initiating any inspection, maintenance, servicing, operation, handling etc if you have any questions, concerns or doubts at the below mentioned email.
