Front Page
Introduction & Support
Regulatory Training
Specification
Installation
Operation
Maintenance
Warranty
Conclusion

Powered by GitBook

On this page

Follow the steps below
1 of 2: Insert batteries into desired slots 1-8
2 of 2: Match the battery slot status to the physical batteries (1-8) within the station

Battery Placement

PreviousInitial Setup NextHardware & Software Inspection

Last updated 2 years ago

Follow the steps below

1 of 2: Insert batteries into desired slots 1-8

2 of 2: Match the battery slot status to the physical batteries (1-8) within the station

Enter the Hextronics Control Panel and select Advanced Menu on the top right of the screen
Scroll down to locate the Battery Slot Placement tab
Set to OCCUPY if there is a battery in the slot
Set to EMPTY if the slot is empty
Select SAVE CONFIGURATION when you ready