Troubleshooting: Hardware/Software

This section is intended for troubleshooting movement errors ONLY

Access the Hextronics control pane

• Access to the Control Panel by scanning the Hextronics provided QR Code within accessories folder, or by clicking the link within the welcome email.

• The Password is also located in the Welcome Email, and also within the Accessories Folder

Select Open roof

Select Raise pad

Select Open LAT & LONG (If closed)

Insert drone onto the landing pad

• Drone MUST face with the front gimbal away from the rear of the station as seen below.

Select Close LAT & LONG

Select Lower pad

Select Open gripper (If closed)

Select Extra command 3

Select Extra command 4

Select Extra command 5

Select Extra command 6

Select Power Drone Toggle

If operations are SUCCESSFUL please continue.

If any operations were UNSUCCESSFUL please contact support immediately.

Select swap batteries (Only If ALL operations have been successful)